免费无码黄真人影片在线_国产亚洲欧美另类一区二区三区_无码AV大香线蕉_久久水蜜桃亚洲AV无码精品麻豆_99精品国产99久久久久久97

歡迎訪問鹽城市遠威電熱機械有限公司官方網站!
產品中心
PRODUCT CENTER
服務熱線

產品中心

當前位置:主頁 > 產品中心 
 
臥式真空清洗爐
 
產品簡介
YW-ZKL系列真空清洗爐適用于化纖行業的滌綸、錦綸和丙綸生產用的組件、噴絲板、過濾芯等清潔處理,也適用于塑料擠出行業的模具清潔之用。
該設備利用高分子聚合物在300度左右時可熔融,高于300度隔絕空氣可裂解焦化,高于400度在有少量空氣的環境中可完全氧化的特性,先將粘有高分子污物的工件加熱到300度(根據工藝要求擬定),使工件上數量較多的高分子聚合物熔化后流淌到爐膛下部的收集容器內,然后再將爐溫升到400-500度,同時打開真空泵,并通入少量新鮮空氣,使剩余的聚合物充分氧化,生成的二氧化碳,經水噴淋后通過水環式真空泵抽吸,和水一起排出爐外。
該系列真空清洗爐均采用不銹鋼電熱管真空爐膛內直接加熱,密封部位均采用耐高溫密封圈,不需水冷卻保護,所以,該設備加熱功率小,熱效率高,升溫速度快,溫度均勻性好,加熱器檢查維修方便,較爐外帶式加熱器加熱節電40%,節水60%,并且,克服了由于水冷卻導致的爐內溫度均勻性差,局部清洗效果不好等缺陷。該設備具有完整的自動化工作性能,只要對程序溫度控制儀輸入擬定的工作程序,設備即能進行自動化清洗工作,中途無需人工操作,并具有超溫、缺相和斷水或低水壓報警功能。
該系列真空清洗爐均采用不銹鋼電熱管真空爐膛內直接加熱,密封部位均采用耐高溫密封圈,不需水冷卻保護,所以,該設備加熱功率小,熱效率高,升溫速度快,溫度均勻性好,加熱器檢查維修方便,較爐外帶式加熱器加熱節電40%,節水60%,并且,克服了由于水冷卻導致的爐內溫度均勻性差,局部清洗效果不好等缺陷。
該設備具有完整的自動化工作性能,只要對程序溫度控制儀輸入擬定的工作程序,設備即能進行自動化清洗工作,中途無需人工操作,并具有超溫、缺相和斷水或低水壓報警功能。
主要技術參數

 

型號
爐膛尺寸
外型尺寸
使用功率kw
加熱/真空泵
真空度MPa
耗水量
m/h3
控制精度
±℃
LZKL-A
Φ500×600
1200×1800×2100
18/22.2
-0.07-0.085
0.23
2
LZKL-B
Φ600×800
2200×2000×2300
21/2.2
-0.07-0.085
0.23
2
LZKL-C
Φ800×1000
2600×2300×2500
27/3
-0.07-0.085
0.28
2
LZKL-D
Φ1000×1200
2800×2500×2700
32/4
-0.07-0.085
0.45
2
JZKL-A
600×400×400
1600×1200×1000
18/2.2
-0.07-0.085
0.23
2
JZKL-B
800×600×600
1800×1300×1100
21/3
-0.07-0.085
0.28
2
JZKL-C
1000×800×600
2100×1500×1300
27/3
-0.07-0.085
0.28
2
JZKL-D
1200×800×800
2100×1500×1600
32/4
-0.07-0.085
0.45
2
WZKL-A
Φ500×600
2000×1000×1300
18/2.2
-0.07-0.085
0.23
2
WZKL-B
Φ600×900
2400×1100×1600
21/2.2
-0.07-0.085
0.23
2
WZKL-C
Φ800×1100
2600×1200×1800
27/3
-0.07-0.085
0.28
2
WZKL-D
Φ1000×1500
2800×1400×2000
32/4
-0.07-0.085
0.45
2
WZKL-T
Φ2000×4800
10000×5000×5000
360/7.5
-0.07-0.085
0.70
2

 

 

 

  The stove is suitable to clean the sets, spinneret and filter core which are used in the producing of terylene, Chinlon and polypropylene in chemical fiber industry. It can also be used to clean the die in plastics extrusion industry.
Based on the high polymer characters such as melting around 300℃, fissioning and coking above 300℃, and oxidizing above 400℃ with a little air, the work pieces adhered with high polymer dirt, firstly, should be heated up to 300℃ to melt these high polymers and make them drip to the collector below the hearth. And then, have the remainder polymer sufficiently oxygenated by heating the stove up to 400-500℃ and turn on the vacuum pump to absorb a little fresh air at the same time. After sprayed by the water, the resultant carbon dioxide will be ejected out together with the water by water-circle vacuum pump. 
These stoves are all made of stainless steel electrical heating tube heated in the vacuum hearth, and all the sealing parts apply high temperature-resistant seal rings. As a result, they are provided with many advantages such as low heat-up power, high thermal efficiency, fast heating up, even temperature distribution, convenience in maintenance, 40% electricity power saving and 60% water saving. And they have also overcomed the shortcomings of bad homogeneity of the temperature in the stove and poor cleaning effects in some location, which result from the water cooling. 
In addition, they can do the cleaning job automatically by inputting the program into the temperature controller without manual operation. They also have the features of exceeding temperature, open phase, water break-off and warning ability to low water pressure. 

 上一篇: 臥式真空清洗爐 下一篇: 預熱爐  
在線咨詢